FAQ: How Many Horse Power Is Motor Model Yy71l3x-2?

What does HP mean for pool pump?

A motor’s effective horsepower, or total horsepower, is the actual power output of the motor. You can determine this by using the nameplate to multiply the horsepower and the service factor together. In this case: A motor’s effective horsepower, or total horsepower, is the actual power output of the moto.

Can I replace a 1hp pool pump with a 1.5 HP?

The really important things to match are flow and head, they should be similarly larger than your 1hp pump. If you have 300 ft of head and 10 gpm, you can’t replace it with 100ft of head and 50 gpm, for example, both of which could be a 1.5 hp pump.

What is uprated motor?

An uprated or max rated pump/motor is simply taking a smaller horse power motor and changing the rating plate’s service factor value to create the impression of more horse power. This practice is now standard operating procedure for all pump manufacturers across all horse power ratings.

You might be interested:  Question: What Is The Pick 6 In Horse Racing?

How much horsepower does my pool pump need?

According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM). Since we always go for the higher GPM, we would select the 1 HP pump.

How many GPH is a 1.5 HP pump?

Its energy-efficient, reliable 1.5HP motor pumps 6,950 GPH with minimal noise and maximum efficiency.

How long do pool pump motors usually last?

Pool Pumps Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years. Modern pumps are made of hard plastic and will over time warp.

Is it OK to run pool pump 24 hours a day?

Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

How much water does a 1 HP pool pump move?

From this chart, you can see that a 1 horsepower pump (the green curve) will give you 52 GPM flow on a system with 64 feet of head.

Can a pool pump be to big?

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

You might be interested:  Question: How Do You Call The Horse In Metal Gear Solid 5?

What does SF HP mean?

Permissible horsepower loading. Motor Service Factor (SF) is the percentage of overloading the motor can handle for short periods when operating normally within the correct voltage tolerances. This means that a 10-hp motor with a 1.15 SF could provide 11.5 hp when required for short-term use.

What is THP in horsepower?

THP stands for Thrust Horsepower (engine power rating)

What is Sfhp pump?

47. 48. 49. C) Total Horsepower: The product of the Rated Horsepower and the Service Factor of a motor used on a Pool Pump (also known as Service Factor horsepower, SFHP) based on the maximum continuous duty motor power output rating allowable for nameplate ambient rating and motor insulation class.

How many gallons per minute does a 1 HP pool pump?

For each 2.0 inch intake line, the maximum flow into the pump will be 73 gallons per minute (GPM). For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).

How many hours a day should you run a pool pump?

Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

Leave a Reply

Your email address will not be published. Required fields are marked *