How To Adjust A Half Horse Briggs & Stratton Engine?

How do you adjust the valves on a Briggs and Stratton 18.5 hp OHV?

To adjust the valves on the engine, remove the 4 screws in the valve cover and remove the valve cover. Remove the spark plug(s) from the engine. Put a clean small screwdriver into the spark plug opening so you can tell when the piston is at the top of the stroke.

How do you adjust the fuel mixture on a Briggs and Stratton?

How do you adjust the fuel mixture on a Briggs and Stratton? Locate the idle adjustment screw on the side of the carburetor. Gently turn the screw clockwise with a flathead screwdriver until the valve touches the seat. Then, back the screw off counterclockwise one-and-a-half turns.

How do you adjust a small engine valve?

Insert the feeler gauge between the tappet and the cam lobe to start the adjustment. Use a screwdriver to turn the center adjusting screw clockwise in the tappet arm until it sits firmly on the feeler gauge. Hold the screwdriver in place, and then tighten the lock nut. Don’t over-tighten it.

How do you adjust the valves on a 21 HP Briggs and Stratton engine?

How to Adjust Overhead Valves

  1. Step 1: Release the brake spring.
  2. Step 2: Insert a narrow screwdriver into the spark plug hole and touch the piston.
  3. Step 3: Check the valve clearance by placing a feeler gauge between the valve head and the rocker arm.
  4. Step 4: Adjust the clearances as required by turning the rocker screw.
You might be interested:  Readers ask: What To Get Someone Whose Horse Died?

What is the valve clearance on a 17 horsepower Briggs & Stratton?

The clearance on the exhaust valve should be. 005-. 007 inches. If adjustment is required, loosen the allen set screw in the center of the nut on the rocker arm and adjust the nut to obtain the proper clearance.

What is the valve clearance on a 21 horsepower Briggs & Stratton?

If it turns out that the engine is a 33M677/0149-B1, the required valve clearances are 0.003-0.005″ for both intake and exhaust, but this is different for each different engine size, so let’s make sure we are talking about the right engine.

How do you adjust air fuel ratio?

Make adjustments 1/2 a turn in either direction to find the smoothest idle speed. Turn the screw counterclockwise and clockwise 1/2 a turn from the middle position and listen to the sound of the idle. Set the screw in the position where the engine’s idle sounds most even and smooth to balance the fuel mixture.

Leave a Reply

Your email address will not be published. Required fields are marked *